![]() Three large ball bearings allow the rest to rise smoothly.Will work with low-profile bow-mounted arrow quivers. ![]() Rubber coating on all possible arrow contact points keeps this rest quiet.Pulls the rest down super fast when the bowstring is released.Rebound dampener eliminates the need for a spring connecting the draw cord to the rest.Can be set up to function off the top or bottom limb.Micro-click adjustments for windage and elevation.Can be adjusted to fit risers with different thicknesses.Hamskea sets the standard for limb-driven arrow rests in the target world, and they brought a lot of that target technology over to the Epsilon, which is sleek, solid, and silent. With the micro-adjust knobs, you can dial in the rest position precisely. That’s hard to do with a free-moving rest. Often times in tuning, only slight rest movements are needed. The rest lifts up as the string is drawn, and then if the user decides to let down the string, the rest goes back to resting on the shelf, and the arrow is not contained.īoth rests also have micro-adjust knobs for windage and elevation, which makes bow tuning far simpler. With some other cable-driven drop-away rests, the rest lies flat on the riser shelf before the string is drawn. What’s nice about that is a bowhunter can draw and let down the bowstring, and the rest will stay in the cocked position, keeping the arrow contained. It’s the sudden release of force that comes when the bowstring is released that causes the rest to drop. What actually makes the rest drop away is not simply the bow string moving back to the undrawn position. Or the user can cock the rest in the up position before drawing, which will keep the arrow contained between the rest forks. If the rest itself sits flat on the riser, then the draw cord will pull it up as the bow is drawn. The Integrate MX is a streamlined arrow rest that offers full containment and micro adjustment. That is, the rest cord is connected to the cable that moves down toward the bottom cam during the draw cycle. There is no extra noise added to your bow because of these rests.īoth of these rests are considered cord-driven drop-away rests, because they employ cords attached to the down cable on a bow. The QAD MXT and Integrate MX are well-built, easy-to-use drop-away arrow rests that do the job of an arrow rest neatly and quietly. But if you have that dovetail on your riser, you want the Integrate MX because it’s sleeker, and the dovetail connection is rock solid. The primary difference between the two is that the Integrate MX will only work with bows that have a dovetail machined into the riser for mounting. They are both drop-away rests that can be locked in the up position for full arrow containment before the shot, and they both are micro-adjustable for windage and elevation. The MXT and the Integrate MX are nearly identical rests from QAD. Micro-adjust simplifies fine-tuning the rest position.Arrow is fully contained until the shot.Micro-adjust knobs for windage and elevation.Draw cord connects to the down cable on the bow.Rest drops away only when the bow is shot.Can be locked in the up position before shooting.The MXT and Integrate are durable, full capture, and easy-to-tune arrow rests.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |